NERIS reporting for small fire departments
NFIRS is gone. Since January 1, 2026, every fire department incident report in the country goes to NERIS. Here is what changed, how a volunteer or small department gets set up, and the mistakes that get a report sent back.
Checked October 24, 2026
What NERIS is
NERIS is the National Emergency Response Information System. The U.S. Fire Administration built it with UL's Fire Safety Research Institute to replace NFIRS, which had been the national fire reporting system since the 1970s.
NERIS covers every kind of call, not just fires: medical, rescue, hazmat, service calls, and wrecks. Reports move from your records system to NERIS electronically, so the state fire marshal and USFA see your calls much closer to when they happen, instead of in a yearly batch.
The NFIRS to NERIS dates
| When | What happened |
|---|---|
| 2025 | The hybrid year. A department could report to NFIRS or NERIS, and once it started in NERIS it could stop sending to NFIRS. |
| January 1, 2026 | Every new incident goes to NERIS. No 2026 incidents go into NFIRS. |
| January 31, 2026 | Last day to finish edits to 2025 NFIRS records. |
| February 2026 | NFIRS shut down. USFA does not hand back a department's old NFIRS data, so a department needed its own copy. |
If your department never exported its NFIRS history, ask your state's fire reporting program what it kept. Going forward, the records system you file from is your copy of your own history.
What is different from NFIRS
- Plain questions instead of codes. Incident types are grouped by category (fire, medical, hazardous situation, rescue, public service, and others), and a good records system asks in words a firefighter uses.
- The address in parts. Street, city, state and ZIP are separate fields, plus a map point. An address typed as one line, or a county name where the city goes, is a common rejection.
- Every unit and its times. Each truck that responded is listed with its own dispatch, en route and on scene times, and the truck has to match a unit in your department's NERIS record.
- Aid by NERIS ID. Automatic and mutual aid, given or received, names the other department by its NERIS ID, one line per department.
- More detail on fires. Structure fires carry questions about alarms, sprinklers, how far the fire spread and what was done, answered once and sent with the report.
How a department starts reporting to NERIS
- Get your NERIS ID. Onboarding gives your department an ID that starts with FD. In most states the State Fire Marshal's office runs onboarding and can tell you where you stand.
- Pick a records system that exchanges data with NERIS. Systems that pass NERIS's data exchange checks carry a NERIS compatible badge. Ask to see it.
- Give that system access in the NERIS portal. Your department's NERIS admin opens Enrollments, pastes the vendor's client ID, and selects Enroll Integration, then Enroll. Until that is done, the system can't send anything for you.
- Add your trucks as units in NERIS and match them in your system. In NERIS: My Account, Memberships, Edit beside your department, Stations, then the station's Edit/View, and Add Unit for each truck (its type, minimum staffing and the name dispatch calls it). This is the step departments skip most, and it stops the first report cold.
- File a real call and check it was accepted. Then file every call the same way, inside the time your state asks for.
Why NERIS sends a report back
These are the rejections small departments run into most, and the fix for each:
| What NERIS says is wrong | The fix |
|---|---|
| The unit list is empty | No truck on the call is matched to a unit in your NERIS record. Add the units in NERIS, match them once, and resend. |
| The address is incomplete | City, state or ZIP is missing, or the whole address is in the street line. Put each part in its own field. |
| Times are missing | Dispatch, en route and on scene times are required for responding units. A call canceled en route needs no on scene time. |
| An aid department has no NERIS ID | Each aid partner needs its NERIS ID on the call. Look it up once and save it with the partner. |
| Fire details are partly filled | On a structure fire, answer the fire questions as a set. Half an answer is rejected where none would not be. |
A good records system checks all of these before it sends, and lists every problem at once with where to fix it, instead of one error at a time from NERIS.
NERIS and your ISO grading
The same call records feed your ISO grading. ISO looks at your structure fires: how many firefighters responded, which trucks went, and how long it took to get there. Logging those details once, on the call, means the NERIS report and the ISO numbers come from the same record. The ISO rating guide covers what else the grader counts.
Questions chiefs ask
What is NERIS?
The National Emergency Response Information System, built by the U.S. Fire Administration with UL's Fire Safety Research Institute. It replaced NFIRS as the national fire and all-hazards incident reporting system.
When did NFIRS end?
USFA made 2025 a hybrid year when departments could report to either system. Every incident from January 1, 2026 goes to NERIS, edits to 2025 NFIRS records were due by January 31, 2026, and NFIRS shut down in February 2026.
How does a fire department start reporting to NERIS?
Get your department's NERIS ID through onboarding, which in most states runs through the State Fire Marshal's office. Then pick a records system that exchanges data with NERIS, give it access in the NERIS portal, and match your trucks to the units in your NERIS record before the first report.
Why does NERIS reject an incident report?
The common reasons are an empty unit list because no truck is matched to a NERIS unit, an address without its city, state or ZIP, missing dispatch, en route or on scene times, and an aid department named without its NERIS ID.
Does a small volunteer department have to report to NERIS?
Reporting rules come from your state, and most states require departments to report incidents. NERIS is also what grant reviewers and the state fire marshal read, so a department that reports leaves a record of its call volume and response.
Keep the records once, use them everywhere
WatchRoom is a NERIS V1 Data Exchange Compatible system. A call comes in from Active911 or your 911 center's CAD report, the crew fills in the rest in plain words, WatchRoom lists anything NERIS would reject before it sends, and filing is one click from the call. Your trucks are matched to NERIS units once, at setup.