NEMSIS for fire departments: what it is and who reports
NEMSIS, the National Emergency Medical Services Information System, is the national standard for patient care reports. A department that gives patient care files its reports with the state, and the state passes the national part on.
Last reviewed November 21, 2026
What is NEMSIS?
It is the national system used to collect, store and share EMS data from the states and territories. It sets one standard for how a patient care report is written down, so a report from one agency can be read by the state and counted nationally. It is a program of the Office of EMS at the National Highway Traffic Safety Administration (NHTSA), and the University of Utah hosts its Technical Assistance Center.
How is NEMSIS different from NERIS?
| NEMSIS | NERIS | |
|---|---|---|
| The record | The patient: what the crew found and did for a person | The incident: what happened, where, and which units went |
| Who runs it | NHTSA's Office of EMS | The U.S. Fire Administration |
| Where a department files | With its state EMS office | With NERIS |
A fire department that runs medical calls and gives patient care usually keeps both: one incident record and one patient care report for the same call. The NERIS guide covers the incident side.
How does a patient care report get to the national database?
- The crew writes the report in software that can send NEMSIS data. The data moves as XML, a format built for one computer to hand a record to another.
- The agency sends it to the state. The agency's record holds the national elements and the ones its state adds.
- The state keeps its data and sends the national elements on to the NEMSIS Technical Assistance Center, where they go into the National EMS Database.
States report in version 3.5 of the standard. NHTSA's Office of EMS gave them until the end of 2024 to move to it.
Does my department have to report?
That is your state's call. An agency reports to its state, not to NEMSIS directly, and each state EMS office sets who must file, which extra fields it wants, and how soon after a call the report is due. If your department holds an EMS license or gives patient care, ask your state EMS office for its data requirements and which software it accepts.
How WatchRoom handles this
WatchRoom EMS is an add-on for departments licensed to give patient care. Patient care reports are NEMSIS v3.5.1 Compliant, start from the call the crew already logged, and go to your state when the crew finishes them. The fire side of the same call is filed to NERIS from the same record. See WatchRoom EMS or the prices.
Questions chiefs ask
What does NEMSIS stand for?
The National Emergency Medical Services Information System. It is the national system used to collect, store and share EMS data from the states and territories.
Is NEMSIS the same as NERIS?
No. NEMSIS is for patient care: the medical report on a person. NERIS is for the incident: the fire, the alarm, the wreck, the units that went. A department that gives patient care on its calls usually keeps both records.
Who runs NEMSIS?
It is a program of the Office of EMS at the National Highway Traffic Safety Administration. The University of Utah hosts its Technical Assistance Center.
Does my fire department have to report to NEMSIS?
An agency reports to its state, and the state sends the national part on. Whether your department has to file patient care reports, and how soon after a call, is set by your state EMS office.
Sources
- NEMSIS: What is NEMSIS: what the system is and who runs it
- NEMSIS: How NEMSIS Works: how data moves from the agency to the state to the national database
- U.S. Department of Transportation: National Emergency Medical Services Information System: NHTSA's role and the University of Utah's
- EMS.gov: What's Going On at the Office of EMS (September 2024): the move to version 3.5 by the end of 2024
Facts on this page were last checked against these sources on November 21, 2026. Rules change; the source is the authority.
Keep the records once, use them everywhere
With WatchRoom EMS the patient care report starts from the fire call the crew already logged, so the times and the address are entered once.
More free guides
- Hydrant flow test calculatorPitot readings to gallons per minute, the flow at 20 psi, and the NFPA 291 color class. Free, in your browser.
- How the ISO rating worksThe 105.5 points, the class lines, the training hours ISO counts, and where volunteer departments lose points.
- How to find your ISO ratingThere is no public lookup. Who Verisk gives the class to, the number a chief calls, and the free report a department can ask for.
- ISO training hours: what countsThe eight training items ISO credits, the hours for maximum credit on each, and the records that prove them.
- NERIS reporting for small departmentsWhat replaced NFIRS, the dates, how a department gets set up, and the reasons a NERIS report gets sent back.
- Fire department grants: AFG and SAFERThe three FEMA fire grants, who can apply, what each pays for, and what to have ready before the window opens.
- Switching fire department softwareWhat to get out of the old system, what to ask the new vendor, and the order to do it in. A checklist.
- Fire service glossaryISO, PPC, FSRS, NERIS, NEMSIS, AFG, SAFER and the rest of the paperwork alphabet, in plain words.
- ISO pre-evaluation checklistThe records to have ready before an ISO survey, section by section, with a free two-page printout.
- 12-month drill calendarTwelve monthly themes and 36 drill ideas, with the ISO training item each relates to. A one-page printout.