Switching fire department software: a checklist
Get a full export of your records before you give notice, check that it opens, and start the new system at the top of a reporting period. The records you cannot rebuild are training hours, incidents and hydrant tests.
Last reviewed November 21, 2026
What should we get out of the old system?
| Record | Why it matters | Ask for |
|---|---|---|
| Training | ISO credits hours per member, and only with a record | Every session with its date, hours, subject and who attended |
| Incidents | Your call history, for grants, budgets and the annual report | Every incident with its number, date, type, address and units |
| Hydrants | Flow tests older than ten years earn no ISO credit, so the dates matter | Each hydrant with its location, inspections and flow tests |
| Apparatus and equipment | Pump and hose testing is part of the fire department score in an ISO grading | Each truck and hose length with its tests, maintenance and dates |
| Personnel | Certifications expire | The roster with certifications and their expiry dates |
| Documents | Policies, pre-plans, contracts | The files themselves, as PDFs |
Ask for spreadsheet files (CSV or Excel). A printed report or a PDF of a table cannot be loaded into another system without retyping it.
What order should we do it in?
- Read your contract for the end date, the notice period, and what it says about your data after you leave.
- Ask for the full export while you are still a customer.
- Open every file. Count the rows against what the old system shows: members, incidents by year, hydrants.
- Load the records into the new system and spot-check a few members' training hours and a few incidents against the old screens.
- Pick a cutover day at the start of a reporting period. January 1 keeps one year's totals in one place.
- Keep read access to the old system, or the export files, until your next ISO grading and your next audit are behind you.
What should we ask the new vendor?
- Is the price public, and what does it cost in year two and year three?
- Is there a charge to bring our records over, and who does the work?
- Can we get all of our data back out, in spreadsheet form, at any time?
- Does it send incidents to NERIS? Every incident from January 1, 2026 goes there.
- If we give patient care: is it accepted by our state EMS office?
- Does it work on the phones our members already carry, and with no signal?
- Can we try it with our own records before we sign?
How WatchRoom handles this
WatchRoom brings records over at no charge. Spreadsheets, photos of paper, and PDFs go to one import page or one forwarding address, and each record lands where it belongs for you to confirm. Incidents are filed to NERIS from the call record. The price is public, and the demo opens with no sign-in. If you are leaving a specific product, see switching from Emergency Reporting or switching from First Due, or the prices.
Related guides
ISO training hours explains why the training export matters most. The NERIS guide covers incident reporting.
Questions chiefs ask
How do I get my records out of my old fire department software?
Ask the vendor for a full export in a format any spreadsheet can open (CSV or Excel), plus your documents as PDFs. Ask before you give notice, and check the files open and the counts match before the contract ends.
What records matter most when switching?
The ones you cannot rebuild: training hours by member, incidents, hydrant inspections and flow tests, apparatus tests and maintenance, and personnel certifications with their dates.
When is the best time of year to switch?
At the start of a reporting period, so one year's records are not split across two systems. January 1 is the common choice because training hours and incident counts are totaled by calendar year.
How much does WatchRoom charge to bring records over?
Nothing. Migration is free, and the price for the software is public on the pricing page.
Sources
- ISO Mitigation: Items Considered in the FSRS: pump and hose testing in the fire department score
- ISO Mitigation: Training: no credit for training without records
- ISO Mitigation: Fire hydrants in residential areas: no credit for flow tests ten years old or older
- U.S. Fire Administration: NFIRS Sunset: incidents from January 1, 2026 go to NERIS
Facts on this page were last checked against these sources on November 21, 2026. Rules change; the source is the authority.
Keep the records once, use them everywhere
Send WatchRoom the export and the records are loaded for you, free. Try the demo first; it needs no sign-in.
More free guides
- Hydrant flow test calculatorPitot readings to gallons per minute, the flow at 20 psi, and the NFPA 291 color class. Free, in your browser.
- How the ISO rating worksThe 105.5 points, the class lines, the training hours ISO counts, and where volunteer departments lose points.
- How to find your ISO ratingThere is no public lookup. Who Verisk gives the class to, the number a chief calls, and the free report a department can ask for.
- ISO training hours: what countsThe eight training items ISO credits, the hours for maximum credit on each, and the records that prove them.
- NERIS reporting for small departmentsWhat replaced NFIRS, the dates, how a department gets set up, and the reasons a NERIS report gets sent back.
- Fire department grants: AFG and SAFERThe three FEMA fire grants, who can apply, what each pays for, and what to have ready before the window opens.
- NEMSIS for fire departmentsWhat NEMSIS is, how it differs from NERIS, and how a patient care report gets from the truck to the state.
- Fire service glossaryISO, PPC, FSRS, NERIS, NEMSIS, AFG, SAFER and the rest of the paperwork alphabet, in plain words.
- ISO pre-evaluation checklistThe records to have ready before an ISO survey, section by section, with a free two-page printout.
- 12-month drill calendarTwelve monthly themes and 36 drill ideas, with the ISO training item each relates to. A one-page printout.